How much SPC you need ?
SPC Container Loading
How much SPC you need ?
How to Use
- Enter Room Length – Input the length of your room in feet or meters (as selected).
- Enter Room Width – Input the width of your room.
- Select Waste Percentage – 7% additional allowance for cutting and installation.(Included)
4. Click "Calculate" – The calculator will automatically compute:
- Total floor area
- Recommended purchase quantity including wastage
- Estimated number of boxes required (if applicable)
5. Review the Results – Use the final quantity while requesting a quotation or placing your order.
Tips
- Measure wall-to-wall dimensions accurately.
- Always include a wastage allowance to account for cutting and future repairs.
- For herringbone and chevron designs, it is recommended to use 10–15% extra material.
- If your room has multiple sections or irregular shapes, calculate each area separately and add them together.
SPC Flooring Calculator | Estimate How Much SPC You Need
AREA DIMENSIONS
Units:
TOTAL AREA COVERED
SQUARE METER
—
SQUARE FEET
—
REQUIRED PLANKS
—
REQUIRED BOXES
—
- * This may vary on basis of your actual need.
- * This is only an approximate calculation. Wastage of ~7% is included.
Need Assistance?
For project estimation or bulk orders, contact Decospaa International at +91 86002 04089 or info@decospaainternational.com
Presented by DECOSPC brand of Decospaa International.
SPC Container Loading
How to Use
1. Choose a calculation mode – Area → load if you know the quantity you need, What fits to see the capacity of one container, Mixed order for several thicknesses shipping together.
2. Select Thickness – 3.5mm, 4mm, 5mm or 6mm.
3. Select Plank Size & Build-up – pick the exact SKU, including EVA-backed and tile-format options. Carton coverage updates with your selection.
4. Enter Order Area – type the area in square metres or square feet (use the sqm / sqft toggle), or tap a preset. In Mixed order mode, add one line per SKU with its own area.
5. Select Container – 20' GP or 40' GP. Each option shows its pallet count and total area for the selected SKU.
6. Enter Ocean Freight (optional) – your rate per container, to get total freight and freight per sqm.
7. Review the Results – container count, cartons, pallets, planks, gross weight, unused space, space-used and payload bars, and a pallet-by-pallet loading plan.
8. Download PDF or Share Quote – attach the result to your enquiry or purchase order.
Tips
- Always calculate on your purchase area, not the bare floor area — add your cutting and wastage allowance (7% typical, 10–15% for herringbone or chevron) before entering it here.
- Quantities are rounded up to full cartons, and cartons to full pallets, because DECOSPC ships in full cartons on full pallets.
- Watch the payload bar. A container can fill on weight before it fills on space, especially with 5mm and 6mm EVA-backed goods.
- If the last container is a light load, adding stock to reach a full pallet or two costs very little freight per sqm — check the freight/sqm figure before you decide.
- One 40' GP is nearly always cheaper per sqm than two 20' GP. Compare both before confirming.
- For mixed orders, keep the number of SKUs low. Fewer SKUs mean full pallets, tighter stowage and less unused space.
- Order the same batch quantity for one project. Splitting a project across shipments can mean a slight shade or gloss variation between production batches.
- Figures follow published packing data. Final loading is subject to carrier payload limits, port regulations and stuffing method — confirm with our team before booking.
Planning a Container Project?
Explore specifications, options, and planning details in our container guide.
Explore specifications, options, and planning details in our container guide.
Need Assistance?
For project estimation or bulk orders, contact Decospaa International at +91 86002 04089 or info@decospaainternational.com
Presented by DECOSPC brand of Decospaa International.
